金屬噴嘴

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

液壓式霧化噴嘴多槽型-上海斐卓噴霧系統有限公司

液壓式霧化噴嘴的特性和優點：

噴嘴僅用液壓而無需壓縮空氣即可噴射小液滴噴霧，噴霧形狀為濃密的大流量實心錐形。產生細小的液滴。大流量下分布均勻。可選雙體型組合件，帶有一個軟皮管內螺紋接頭轉換器。

液壓式霧化噴嘴更多信息請登錄斐卓公司網址或者致電我司進行詳詢。液壓式霧化噴嘴分為F型和FF型，F(xiàn)型是雙體，帶軟管螺紋轉接器，F(xiàn)F分為整體式，3/4

標準型扇形噴嘴;H/U系列-上海斐卓噴霧系統有限公司

扇形噴嘴的噴霧特性及設計特點:

扇形噴霧將液流分布成扇形或?qū)訝顕婌F；液滴大小為小到中等。在很寬的的流量和壓力范圍內，保持均勻的分布。在2.8公斤壓力下，噴流角度從0度到110度。

扇形噴嘴具有特色的邊緣漸細型噴霧，適用于多種噴嘴安裝和集管 噴淋的應用。高沖擊力的液柱流在單位面積上提供很大的沖擊力。通暢的流暢通道盡可能的減少了堵塞。

Standard fan nozzle;H/U series - Shanghai Fiji zhuo spray system co., LTD

Fan nozzle spray characteristics and design features:

Fan-shaped spray flow distribution into the fan or layered spray;Droplet size is small to medium.Over a very wide range of flow and pressure, maintain uniform distribution.Under pressure from 2.8 kg, jet Angle from 0 degrees to 110 degrees.

The edge of the fan nozzle characteristic gradually thin type spray, applicable to a variety of the nozzle and manifold applications of spray.High impact flow of liquid column provides maximum impact on unit area.Fluency of unobstructed channels as much as able to reduce the congestion.

扇形噴嘴的一般應用：

冷卻與淬火；

產品洗滌；

水的冷卻；

空氣與氣體凈化器；

擦洗器；

液體清洗器；

灰塵控制；

防火；

General application of the fan nozzle:

Cooling and quenching;

Product washing;

The water cooling;

Air and gas purifier;

Scrub;

Liquid cleaner;

Dust control;

Fire prevention;

標準扇形噴嘴H/VV和H-VVL系列扇形噴嘴的特點：

在3公斤壓力下流量為3.9L/MIN,具有外管道螺紋接頭。在訂購號中以DT替代VV即可提供外管道螺紋接頭，H-VVL表示噴嘴內將裝過濾器（在內管道螺紋接頭時沒有過濾器）

噴嘴角度從0°-120°不等，流量大小為0003-11020.

材質以普通不銹鋼和316不銹鋼為主，黃銅另加工。

主要用來冷卻清洗；

淬火；

產品洗滌；

Standard fan nozzle H/VV and H - VVL series fan nozzle features:

Under 3 kg pressure flow of 3.9 L/MIN, with outer pipe nipple.In order number to DT alternative VV can provide outside the pipe nipple, H - VVL said inside the nozzle filter (including pipe nipple without filter)

Nozzle Angle ranging from 0 ° to 120 °, the flow size of 0003-0003.

Material is given priority to with ordinary stainless steel and 316 stainless steel, brass and processing.

Mainly used for cooling and cleaning;

Quenching;

Product washing;

Cooling and quenching;

The product of washing;

Water cooling;

Air and gas purifier;

Thrust washer washing;

The liquid is clean;

Dust control;

Fire prevention;