FM霧化噴槍

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

FM霧化焚燒噴槍-上海斐卓噴霧系統有限公司

FM Air atomizing incineration spray gun          

焚燒噴槍簡介焚燒系統

  焚燒噴槍主要應用于脈沖拋式爐排

焚燒爐、機械爐排焚燒爐、流化床焚燒

爐、回轉式焚燒爐和CAO焚燒爐等各種

類型的焚燒爐！焚燒爐原理是利用煤、

燃油、燃?xì)獾热剂系娜紵褜⒁幚?/p>

的物體進行高溫的焚毀碳化，以達到消

菌的目的。而焚燒噴槍主要是用來進行

廢液霧化，有以下優點：

1、采用內部混合式雙流體霧化，其混

合程度、霧化效果、燃燒速度效率極高，

過?？諝庀禂?shù)低，可節約大量燃料；

2、霧化噴頭口徑大，對流體粘度、雜質水平噴射

含量要求不高，不易堵塞；采用低壓噴

霧方式，較高壓噴槍式安全，不易磨損，

不易故障，燃燒效果好，霧化介質可用

低壓蒸汽或空氣；

3、根據其焚燒工藝，焚燒噴槍也可用

在特有的流化床鍋爐進行焚燒，滿足眾

多的應用要求。 焚燒噴槍實物圖

豎直噴射         

氨水脫硝噴槍系列噴槍產品特性：

1、在噴霧量17L/min，氣水比為150的情況下，噴霧粒徑平均值為50μm，粒徑150μm，故具有優越的微?；芰?；

2、噴霧角度分別為20°和60°兩種；

3、微霧噴嘴，是以新構想而開發出的大流量，并具有優越微?；芰Φ亩黧w噴嘴；

4、以低氣水比而使噴霧微粒化，因此用少量的壓縮空氣可做大流量的噴霧；

5、構造簡單，維修容易。

可選材質：303、316不銹鋼；同時還有310不銹鋼和哈氏合金材質可供選擇。

The characteristics of ammonia denitration gun:

1, produce the average particle size is 70 microns 'micro fog' two fluid fan nozzle.

2, flow adjustment range is larger, and spray Angle changes small.

3 shape, spray particle size uniform in all area.

4, equal distribution of flow, suitable for most of the nozzle arrangement is used, jet distance, strong penetrating power.

5, foreign body through the diameter is big, not easy to block.

6, simple structure, easy to maintain

7, portable design, easy installation and removal of more quick, save installation, maintenance workload.

8, spray gun cylinder propulsion system can be used for automatic spray gun propulsion, prolong the service life of spray gun.

Ammonia denitration gun main use:

1, denitration: ammonia, urea, such as reducing agent spraying.

2, cooling, boiler exhaust gas, such as casting cooling.

3, wet: concrete, waste gas humidification.

4, burning: waste water, waste burning

Material: 303, 316, 310 stainless steel, alloy

The spray shape: fan product introduction

Ammonia denitration gun ordering information:

Feizhuo - F - SS

sncr脫硝噴槍產品介紹CSNCR系列噴槍有三種流量款式

設計特點

1、SNCR噴槍上的噴嘴使用大流量的空氣霧化型噴嘴，擁有多級霧化效果，在火力發電廠除塵脫硫脫硝，化工廠、水泥廠和除塵環保工程都有廣泛應用；

2、采用雙流體噴嘴，并使用蒸汽或空氣做第二流體；

3、在最?lèi)毫拥沫h(huán)境中，效率很高設計以及三級霧化仍能用最少的壓縮空氣使用量達到好的霧化性能；

4、內部裝有螺旋噴嘴為第二級霧化噴嘴，螺旋噴嘴的大孔徑流通通道設計可有效防止堵塞等惡劣的流體環境。

SNCR系列噴槍的標準材質:316不銹鋼鈷合金6耐磨護套。如需其他材質，請注明管徑、連接方式、噴嘴號、噴霧角度和材料。

      角度:20°、60°、90°

      流量：2.0-80L/min

      材質：303、316、310不銹鋼，哈氏合金

      噴霧形狀：空心錐形、實心錐形、扇形

SNCR denitration gun series product introduction CDE gun there are three kinds of flow pattern, 

Design features

1, SNCR spray gun nozzle on the use of large flow type air atomizing nozzle, with multistage atomization effect, dust removal desulfurization denitration in coal-fired power plants, chemical plants, cement plants, and dust environmental engineering has a wide application;

2, with double fluid nozzle, and use of steam or air to do a second fluid;

3, in the worst environment, high efficiency design and tertiary atomization can still use the least amount of compressed air atomization performance usage is the highest;

4, inner is equipped with spiral nozzle for secondary atomization nozzle, screw nozzle of large aperture distribution channel design can effectively prevent the blockage of bad fluid environment.

Of SNCR gun series standard material: stainless steel 316 cobalt alloy wear resistant sheath 6.If you need other materials, please indicate the diameter, the connection way, nozzle number, spray Angle