霧化噴頭

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

空氣霧化噴嘴通過外部混合裝置改變氣體壓力而不改變液體流率來控制霧化，對于扇形噴霧，尺寸”A“流型寬度,如圖所示。噴嘴從噴嘴投射到很大彌散點的總距離為“D”。

霧化噴嘴可以隨時的調整氣壓和水壓，比例可隨時調整，1：15.

噴霧角度為扇形和實心。角度60°。

接口螺紋大小為3/4.

Air atomizing nozzle changing gas pressure by external mixing device without changing the liquid flow rate to control the atomization, the fan-shaped spray, dimension 'A' type flow width, as shown.Nozzle of projects from the nozzle to the maximum dispersion point total distance for the 'D'.

Atomizing nozzle can adjust the air pressure and water pressure, ratio can be adjusted at any time, 1:15.

The spray Angle for the fan and solid.Angle 60 °.

Interface thread size for three quarters.

液壓式多頭霧化噴嘴

大容量固定槽罐清洗噴嘴中的13FULLJET噴嘴可產生多種噴射形狀和覆蓋面積；

簡易、可靠、不移動部件；

可選材料:黃銅、低碳鋼、不銹鋼；

壓力范圍：1.5到3.5bar。

極高工作溫度是360度。

系列廣泛的噴射覆蓋面；

可清洗直徑為3.1米的槽罐；

使用1/4或3/8實心錐形噴嘴。

流量范圍;35到230L/MIN,

槽罐開口尺寸:152mm

材料;黃銅，303,316不銹鋼；

斐卓Feizhuo虹吸霧化噴嘴設計特點：

虹吸霧化噴嘴能夠調節液體流量，在不改變空氣壓力和液體壓力的環境下，同樣可以產生合乎要求的噴霧，因此具有很強的適應性。每一種噴霧裝置均由空氣帽和液體毛組成，能夠提供扇形和圓形的噴霧模式，并有著廣泛的流量范圍。噴嘴體的入口接頭有多種尺寸，適合大多數常用的管道。以上噴嘴部件可以互換，這為得到不同的噴霧性能提供了靈活機動性。

The Fijian zhuo Feizhuo siphon atomization nozzle design features:

Siphon is a fluid mechanics phenomenon, can need not pump and pumping liquid absorption.Siphon atomization nozzle decreased by increasing the pressure of a gas or liquid pressure to get more fine droplet spray, which leads to higher turnover of gas liquid flow rate.Siphon the micro droplet spray atomization nozzle, can volatilize very good humidification effect on the surrounding environment, the nozzle is the requirement of humidity control places ideal choice.The internal structure of special design can make the liquid and gas mixing, produce fine spray droplet size.Usually, by increasing the gas pressure or lower liquid pressure can be more subtle (30 microns) of spray droplets, resulting in a higher gas flow rate and liquid flow rate.

Siphon atomizing nozzle can adjust liquid flow rate, without changing the air pressure and fluid pressure environment, also can produce accordance with the requirements of the spray, so has a strong adaptability.Each spray of air cap and liquid hair, provide the fan and circular spray pattern, and has a wide flow range.The entrance of the nozzle body joint has a variety of sizes, suitable for most commonly used pipe.Above the nozzle parts are interchangeable, the performance for different spray flexible mobility.