SNCR脫硝噴槍雙流體噴槍的一般應用:
噴槍采用快速接頭連接方式,拆卸方便;
采用保護碳化硅,具有耐高溫,耐磨損等特點,無需另設冷卻裝置就可確保噴槍長期安全運行;
噴槍體積小,套管外徑只有36mm,可直接安裝于爐壁上。
噴槍采用保護套管及活動法蘭連接??墒謩?dòng)將伸進或者退出爐內;
采用金屬保護套管設有風冷接口,確保高溫環境下長期使用;
一般應用:
燃煤鍋爐半干法噴霧脫硫;
高爐瀘頂噴霧降溫;
高爐煤氣降溫冷卻;
水泥干法線轉窯尾增濕塔煙氣增濕降溫冷卻;
垃圾焚燒冷卻塔高溫?zé)煔鈬婌F降溫冷卻;
有色金屬冶煉高溫?zé)煔獾膰婌F降溫冷卻;
高爐重力除塵器內煙氣的干法噴霧降溫;
電路煉鋼廠煙氣的蒸汽冷卻;
玻璃、燒結、化工行業高溫?zé)煔鈬婌F降溫。
SNCR denitration gun general application of the dual fluid spray gun:
Spray gun using quick joint connection, disassemble;
Adopt protection of silicon carbide, with high temperature resistance, wear resistance and other characteristics, without setting up cooling device can ensure the long-term safe operation of the spray gun;
Only 36 mm gun is small in size, casing diameter, can be directly installed on the furnace wall.
Spray gun used to protect casing flange connection and activities.Manual will be reached or come back;
Use a metal protective casing is equipped with air cooling interface, to ensure the long-term use under high temperature environment;
General application:
Coal fired boiler semi dry spray desulfurization;
The blast furnace filter spray cooling;
Blast furnace gas temperature and cooling;
Cement dry normal turn preheater humidifying tower flue gas humidification and cooling of cooling;
Garbage incineration flue gas spray cooling tower high temperature cooling cooling;
Smelting non-ferrous metal spray cooling high temperature flue gas cooling;
Blast furnace flue gas dry spray cooling in gravity dust collector;
The circuit steel plant flue gas steam cooling;
Glass, sintering, chemical industry, high temperature flue gas spray cooling.
FM霧化噴槍的三種霧化技術的特點
(1)
傳統高壓霧化方式
:傳統高壓噴槍的噴涂氣壓一般為
4.0
巴,涂料是靠壓縮空氣的
壓力完成霧化的。因此,傳統噴槍的風帽霧化壓力必須要夠高才能有足夠的能量把涂
料霧化好,可是高的霧化壓力會令霧化后的涂料會產生一個較大的流速,當涂料流速
過快地噴射在工件表面時,就會產生一定的反彈形成過噴,大大降低了涂料的傳遞效
率(即上漆率)
,它的傳遞效率一般僅為
35
%-
45
%左右,除了產生不必要的污染外
亦浪費涂料。
斐卓Feizhuo氣動式伸縮噴槍性能特點
1、 霧化均勻——噴霧全區域的粒徑分布均勻,為液體的均勻蒸發和吸收反應提供了非常優越的保證。平均顆粒直徑只有60μm,粒徑120μm。
2、 運行成本更低——低氣水比是此款噴槍的優點,長時間使用更能節省運行成本。
3、 氣動伸縮裝置——噴槍采用氣動伸縮裝置,噴槍不運行時可以自動退出爐內,易于噴槍的維護,大大延長了噴槍的使用壽命。
4、 流量范圍廣——流量范圍從3L/h—400L/h,可以滿足各種流量需求。
5、 使用壽命長——因噴嘴是在低壓環境下工作,水壓氣壓都不超過0.6Mpa,所以對噴嘴磨損很小,而噴槍亦可帶保護套管,噴嘴置于保護套管內,能夠更好保護噴嘴,從而大大延長使用壽命。
角度:20°
流量:0.05-6.67L/min
材質:304、310不銹鋼,哈氏合金
噴霧形狀:空心錐形、實心錐形、扇形產品介紹
The Fijian zhuo Feizhuo pneumatic telescopic spraying performance characteristics
1, uniform atomization, spray the whole area of uniform particle size distribution, provides the uniform liquid evaporation and absorption reaction is very superior.The average particle diameter of only 60 mu m, maximum particle size of 120 microns.
2, lower operation cost, low gas water ratio is the advantage of this spray gun, use for a long time can save running cost more.
3, pneumatic telescopic device, pneumatic telescopic device for the gun, spray gun not runtime can automatically come back inside, easy to spray gun maintenance, greatly extend the service life of the gun.
4, wide flow range - flow range from 3 l/h, 400 l/h, can satisfy all kinds of traffic demand.
5, long service life, because of the nozzle is working under low pressure environment, hydrostatic pressure no more than 0.6 Mpa, so wear of nozzle is small, and the spray gun can protect casing, nozzle inserted in case, can better protect the nozzle, thus greatly