脫硝噴槍

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

sncr脫硝噴槍產品介紹CSNCR系列噴槍有三種流量款式

設計特點

1、SNCR噴槍上的噴嘴使用大流量的空氣霧化型噴嘴，擁有多級霧化效果，在火力發電廠除塵脫硫脫硝，化工廠、水泥廠和除塵環保工程都有廣泛應用；

2、采用雙流體噴嘴，并使用蒸汽或空氣做第二流體；

3、在最惡劣的環境中，效率很高設計以及三級霧化仍能用最少的壓縮空氣使用量達到好的霧化性能；

4、內部裝有螺旋噴嘴為第二級霧化噴嘴，螺旋噴嘴的大孔徑流通通道設計可有效防止堵塞等惡劣的流體環境。

SNCR系列噴槍的標準材質:316不銹鋼鈷合金6耐磨護套。如需其他材質，請注明管徑、連接方式、噴嘴號、噴霧角度和材料。

      角度:20°、60°、90°

      流量：2.0-80L/min

      材質：303、316、310不銹鋼，哈氏合金

      噴霧形狀：空心錐形、實心錐形、扇形

SNCR denitration gun series product introduction CDE gun there are three kinds of flow pattern, 

Design features

1, SNCR spray gun nozzle on the use of large flow type air atomizing nozzle, with multistage atomization effect, dust removal desulfurization denitration in coal-fired power plants, chemical plants, cement plants, and dust environmental engineering has a wide application;

2, with double fluid nozzle, and use of steam or air to do a second fluid;

3, in the worst environment, high efficiency design and tertiary atomization can still use the least amount of compressed air atomization performance usage is the highest;

4, inner is equipped with spiral nozzle for secondary atomization nozzle, screw nozzle of large aperture distribution channel design can effectively prevent the blockage of bad fluid environment.

Of SNCR gun series standard material: stainless steel 316 cobalt alloy wear resistant sheath 6.If you need other materials, please indicate the diameter, the connection way, nozzle number, spray Angle and materials.

FM空氣霧化噴嘴主要特性:

1、FIM系列噴槍分為兩種噴霧方式，扇形噴霧和圓形噴霧。根據客戶的需求可選用不同形狀的噴霧方式；

2、FIM微霧噴嘴噴霧量小，平均粒徑在50μm以內，粒徑120μm。為低氣水比、低流量的二流體噴嘴；

3、足以應對冷卻塔內粉塵環境問題，進行先進、小型化的設計；

4、足夠小的噴嘴和槍體能夠在安裝條件苛刻的環境下方便使用；

5、流量分布均等，適合于多數噴嘴配列；

6、噴霧全區域的粒徑均勻分布，為液體的均勻蒸發和吸收反應提供非常優越的保證；

可選材料：303、316和310不銹鋼為標準材料，還有哈氏合金材料供選擇，以用于更嚴酷的環境。

角度:12°—56°

      流量：0.05-0.3L/min

      材質：303、316、310不銹鋼，哈氏合金

      噴霧形狀：空心錐形、實心錐形、扇形

訂購信息

FM air atomizing nozzle main features:

1, FIM gun series is divided into two types of spray, fan-shaped spray and circular spray.According to the demand of the customers can choose different shaped spray way;

2, FIM micro fog nozzle spray volume small, the average particle size within the 50 microns, maximum particle size of 120 microns.For the low gas water ratio, low flow of the two-fluid nozzle;

3, enough to deal with cooling tower dust environment, for the design of advanced, miniaturization;

4, a small enough nozzle and gun to strict environment installation convenient use;

5, equal distribution of flow, suitable for most of the nozzle arrangement;

6, spray particle size of the whole area of the uniform distribution, provide liquid evaporation and absorption reaction with very superior guarantee;

Optional material: 303, 316 and 310 stainless steel as standard material, and hartz alloy material choice, for more harsh environments.Order information

(3)RP低流量中氣壓霧化方式：RP(Reduced＝降低了的；Pressure＝風帽氣壓)省漆高效系列噴槍有先進的霧化技術，它結合了傳統噴槍與HVLP噴槍的優點，其風帽空氣壓力約在1.2-1.3巴之間；涂料傳遞效率在65％以上，但耗氣量比傳統噴槍更低(每分鐘295升，進氣壓力2.5巴)，操作上跟傳統噴非常接近。