上海霧化噴嘴

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

帶開關控制的空氣霧化噴嘴JJAU設計特點

1/8jjau系列噴嘴與1/4JAU系列噴嘴功能是一致的，只是結構上緊湊精巧，適合空間狹小的場合使用。

1/8JJAU系列噴嘴的大的特點是一個內部氣體驅動腔，能夠控制噴霧的開和關，每分鐘最快運行180次。

在噴嘴本體上有一個霧化空氣入口AIR和液體入口LIQUID，螺紋接口為1/8，另外針閥驅動腔空氣入口為CYL。

噴嘴本體可以與專用的迷你型噴霧裝置配合使用。

霧化噴嘴一般應用:

磨具自動潤滑；

噴霧加濕；

自動噴涂脫膜劑；

自動噴灑；

自動噴碼打標；

定時定量噴灑化學劑；

With a switch control air atomizing nozzle JJAU design characteristics

1/8 jjau series nozzle and 1/4 jau series nozzle function is the same, just the structure compact, suitable for occasions in the narrow space.

The biggest characteristic of 1/8 jjau series nozzle is an internal gas driven cavity, can control the spray and off, run the fastest 180 beats per minute.

On the nozzle body has a atomization AIR inlet AIR and LIQUID inlet LIQUID, screw thread interface at 1/8, while needle valve driven cavity AIR inlet for cyl.ul.

Nozzle body can be used with dedicated miniature spray.

Spray nozzle general applications:

Abrasive tool automatic lubrication;

Spray humidification;

Automatic spraying remover;

Automatic spraying;

Automatically printing marking;

Timing quantitative spraying chemical agent;

霧化噴嘴之壓力傳送噴霧裝置（內混式）優點和特性：

For circular spray, remained in the whole distance B Angle A, B, beyond distance spray into turbulence, and jet distance to D.

When using pressure conveying liquid system, through the pressure to the nozzle.

Liquid and compressed air or other gas was mixed in internal, to produce fully atomized spray;

更多霧化噴嘴信息請聯系斐卓Feizhuo，或者登陸我司網站進行查詢!

空氣霧化噴嘴壓力輸送噴霧裝置（內混式）

噴霧噴嘴的優點和特性：

對于扇形噴霧，尺寸A、B、和C是距離噴嘴相應距離處的噴霧寬度。

從噴嘴到很大彌散點的噴霧投射總距離為D.

當使用壓力輸送液體系統時，液體通過壓力被送往噴嘴。液體和壓縮空氣或者其他氣體在內部被混合，以產生完全霧化的噴霧。

Air atomizing nozzle pressure spray device (mixed type)

The advantages of spray nozzle and features:

For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray width.

The spray from the nozzle to the maximum dispersion point projected a total distance of D.

When using pressure conveying liquid system, through the pressure to the nozzle.Liquid and compressed air or other gas was mixed in internal, to produce a fully atomized spray.