TCP0150 電流探頭

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

 The TCP0150 is a high performance and easy-to-use 150 A AC/DC current probe designed for use and direct connection to the TekVPI? probe interface.

KEY PERFORMANCE SPECIFICATIONS

• DC to 20 MHz bandwidth
• 150 A_RMS maximum current capability
• 500 a peak pulse current capability
• High accuracy with typically less than 1% DC gain error
• Accurately measures current levels as low as 5 mA

KEY FEATURES

• Easy-to-Use and accurate AC/DC current measurements
• Connects directly to oscilloscopes with the TekVPI? probe interface
• Low noise and DC drift
• Provides automatic units scaling and readout on the oscilloscope's display
• Remote GPIB/USB probe control through the oscilloscope
• Split-core probe head construction allows easy connection to conductors
• Easy to degauss and autozero
• Setup controls and probe status and diagnostic indicators are provided on both the probe hardware and through an Easy-to-Access scope UI display menu

Bandwidth

DC to ≥20 MHz (-3 dB). Derate with frequency. See Figure 1. (Calculated from Rise Time BW = .35/Rise Time)

Rise time

≤17.5 ns

Max RMS current

150 A

Max peak pulse current

500 A

Minimum sensitivity

5 mA (on oscilloscope's 1 mV/div setting)

AC coupling (on oscilloscopes that support AC/DC coupling)

Current ranges

25 A and 150 A

Max bare-wire voltage

600 V_RMS CAT I and II

300 V_RMS CAT III

TYPICAL CHARACTERISTICS

DC accuracy

±1% typical (3% warranted)

Max amp-second product

25 A range

3,000 aμs

150 A range

15,000 aμs

Insertion impedance

0.03 Ω at 1 MHz

0.075 Ω at 5 MHz

.125 at 10 MHz

.3 at 20 MHz

Signal delay

≈ 21 ns

Displayed RMS noise

≤500 μA_RMS (probe only)

PHYSICALCHARACTERISTICSCONTAINER

Cable length

2 meters (79 in.)

Probe head size

Length

26.8 cm (10.55 in.)

Width

4.1 cm (1.6 in.)

Height

15.6 cm (6.13 in.)

Max conductor diameter

21 mm x 25 mm (0.83 in. x 1.0 in.)

Shipping weight

.7865 kg (1.734 lb.)

Power requirements

TCP0150 is powered directly by oscilloscopes with the TekVPI interface

ENVIRONMENTAL

Temperature

Operating

0 oC to +50 oC

Nonoperating

-40 oC to +75 oC

Humidity

Operating

5% to 95% RH (Relative humidity) at up to +30 oC

5% to 85% RH above 30 oC up to +50 oC, noncondensing

Nonoperating

5% to 95% RH (Relative humidity) at up to +30 oC

5% to 85% RH above 30 oC up to +75 oC, noncondensing

Altitude

Operating

Up to 2,000 meters (6,560 feet)

Nonoperating

Up to 12,000 meters (40,000 feet)